OZTRAIL WINTON DOUBLE (WATERPROOF PVC FLOOR) CANVAS DOME SWAG TENT

 

NEW! OZtrail Winton Double

Why PVC? PVC is much more waterproof than the canvas and this only increases its ability to withstand all that mother nature can throw at. The other major benefit is that it is great for keeping your kit dry when rolled up in the back of the ute, as the water does not absorb into the material and where possible all seams are internally sewn to reduce water seepage.

 

Features:

– Same height all the way through

– You can enter from either side or either end of the swag

– Has mesh at either end – but can also be fully closed

– Size: 210 x 145cm

• Tough and reliable SatProof 600+ 380 gsm Ripstop Canvas™
• Hard wearing tub vinyl floor with removable boot mat
• Tri pole dome style construction with generous height from head to foot
• Hi Tensile Durallium™ 7001 alloy dome poles
• Sturdy steel centre ridge pole with one touch pole adjustment allows for quick setup without pegs or ropes
• Protective head and foot window awning for all weather ventilation
• Sturdy No. 10 coil zips with twin pullers for easy access to full length top and head opening 
• Excellent ventilation with large foot window, full size head and top entry options
• Heavy duty No-See-Um mesh for total insect control
• 7cm high density open-cell foam mattress with zip off poly/cotton cover
• Removable mattress cover for easy washing
• Sturdy webbing roll straps with double D rings
• Pegs and ropes included to allow versatile set up
• 2 internal storage pockets
• Pegs and ropes included to allow versatile set up
• Weight: 15kg

 

 

 

 

 

---

Ask a Question about this Product

Ask a question

---

Important: Swag Helpful Hints

• This product is designed as a portable and temporary dwelling and is not for permanent use.
• Avoid continuous exposure to sunlight as this will eventually cause the canvas to weaken, fading is an early warning sign of this process
• New canvas products require conditioning. Simple pitch your swag and wet it down with a garden hose and let it dry. This allows the stitching holes to shrink and the stitching thread to swell providing a seal to form. It may be necessary to repeat this procedure 2 or 3 times to fully condition the canvas. Ensure the swag is completely dry before packing away.
• A traditional first aid treatment for canvas is to always carry some candle wax. After storage and transport canvas may develop a damp area in wet conditions. Simply rub the candle wax to the outside of the damp area and this will create a waterproof barrier.
• To extend the life of the mattress always store the swag and mattress unrolled.
• Before storing the swag ensure the swag is clean and completely dry. Never store a damp or wet swag.

---

Swag Assembly Tips:

• Select a level camp site, the area of stones and twigs etc.
• Unroll the swag, you will find pegs, ropes and on some models poles.
• Peg out the four corners.
• On the models with alloy poles, assemble alloy poles, side through the poles sleeves, connect to the pin and ring assembly at the base of the swag and connect the plastic hook clips. On models with 3 alloy poles, the mid poles is fitted inside the swag and connected with Velcro securing tabs.
• On models with a single short fibre pole this is to be placed into the external pocket at the foot of the swag and wedged into a vertical position.
• On models with metal pole, assemble the pole, place the spigot through the eyelet at the head of the swag, attach guy rope and peg out or tie to vehicle or tree.
• If required use guy ropes provided to peg out or tie to vehicle or tree. This will keep the swag taut which is important during rain.